AirForce Spin-Loc Air Tank, Fits TalonP / Escape Airguns

This clever device clips into the base of your Weaver or Picatinny mount (both 1-pc mounts and 2-pc mounts), thereby reducing the size of the clamping jaws on the mount! You'll still have to resight the gun after attaching the scope, but you won't have to reset or retighten the scope in the mount.18 oz 2 pieces If your air gun or rimfire gun has a scope dovetail that measures either 11mm or 3/8" (approx. A very easy way to make your mounts more useful for a wider range of guns.24" high .

BKL 1-Pc Adjustable Scope Mount, 30mm Rings, 3/8 or 11mm Dovetail, Black.5 oz. The base has 6 screws to tighten it to your gun's scope rail/dovetail.

1-pc scope mount 3/8 dovetail Low profile 1 rings 2 screws per ring cap Adjustable height to accommodate barrel droop 3/8 side rails for mounting other accessories 2. 6 base screws Matte black Includes 3 hex wrenches • Got barrel droop? BKL 1-Pc Adjustable Scope Mount, 1 Rings, 3/8 Dovetail, Black.5 of clamping length 4 overall length 120 minutes of angle adjustment (2 degrees of angle) 4.5 oz.

875 long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank has an integral pressure gauge that lets you monitor how much air is left in the tank..No more guessing!• *To retrofit your gun to accept the Spin-Loc standard tank, send it to AirForce Airguns.

.875 long Can be used only with compressed air or dry nitrogen gas Does not fit older models of guns unless they have been retrofitted* to accept the new tank The Spin-Loc air tank has an integral pressure gauge that lets you monitor how much air is left in the tank.