AirForce 11mm-to-Weaver Adapter

Name: AirForce & AirForce 11mm-to-Weaver Adapter
Brand: AirForce
SKU: CAWQ-1923
Price: 42.95 USD
Availability: InStock

About The The cross slots deliver extra gripping area for the rings, making it almost impossible for the scope mount to shift. This would be an especially good addition to any hard-recoiling spring-piston rifle.12 overall length 4 hex screws secure the base Includes a hex wrench Use on AirForce rifles and pistols or any other airgun or rimfire that has a 3/8 or 11mm dovetail

The cross slots deliver extra gripping area for the rings, making it almost impossible for the scope mount to shift. Weaver/Picatinny scope bases offer a much tighter grip on your scope mounts. 11mm (or 3/8) dovetail-to-Weaver/Picatinny adapter 3.04 clamping & mounting length .69 high 4.12 overall length 4 hex screws secure the base Includes a hex wrench Use on AirForce rifles and pistols or any other airgun or rimfire that has a 3/8 or 11mm dovetail. This would be an especially good addition to any hard-recoiling spring-piston rifle. You may need to buy two of these adapters, depending on the length of the scope mount you're using and on the length of the scope rail to which you're attaching this adapter.

Accessories

In fact, even with these larger-than-usual air pistols, there was room left for tins of pellets, a small dot sight and a few other small accessories.

Replacing the filter is essential for proper functioning of the pump.

Accessories

Specifications of AirForce 11mm-to-Weaver Adapter
Category	Sporting Goods > Outdoor Recreation > Hunting & Shooting > Paintball & Airsoft > Airsoft
Instock	instock

Last Updated May 10th, 2024 01:34 pm

Rating :- 9.67 /10

Votes :- 32

Remove it from its current stock and slip it into this one.

Air Arms S510 Monte Carlo stock Poplar with beech satin stain Ambidextrous (two raised cheekpieces) Uniquely checkered forearm & pistol grip Need a new stock for your Air Arms S510 air rifle? Made by Air Arms, it'll grace your gun as beautifully as the original. Air Arms S510 Monte Carlo Stock, Poplar, Beech Stain, Ambidextrous.

Apparel & Accessories

Clothing

Uniforms

Sports Uniforms

Martial Arts Uniforms

Accessories

Air Arms

Many airgunners prefer single-shots because they feel it gives them better control.

Single-shot adapter .

BSA

Use on any air gun, airsoft gun or firearm that has a Weaver or Picatinny rail.

UTG 30mm Max Strength Rings, Low, Weaver/Picatinny, Twist-Lock Base.The cross-slots help stabilize the rings so your scope or dot sight is rock-solid.

Cameras & Optics

Camera & Optic Accessories

Optic Accessories

Weapon Scope & Sight Accessories

Accessories

UTG

Put this on any gun...firearm, air gun or airsoft rifle...and commence to shootin'.

15.

Cameras & Optics

Optics

Scopes

Weapon Scopes & Sights

Accessories

UTG

recommended) into the adapter (see note below) Extremely economical...more shots, less money EBOS buttstock cannot be attached when you use this bulk-fill CO2 adapter Does NOT void the manufacturer's warranty • NOTE: The paintball tank valve will immediately open when it's completely screwed into the adapter.

Make sure the adapter is tightly/securely installed in the gun before the tank is tightened down.Air Venturi CO2 bulk-fill adapter Fits Umarex EBOS Screw the adapter into the CO2 port of the EBOS With the adapter securely attached, screw a paintball CO2 bulk-fill tank (12 oz.

Accessories

Air Venturi

Full service seal kit For Hill MK3 hand pumps Includes micron filter, 7 seals and other misc.

. Includes micron filter, piston seal and all other exchangeable seals.Hill MK3 Hand Pump Full Service Seal Kit w/Micron Filter replacement parts Service seal kit for the Hill MK3 hand pump. Regular maintenance is essential for keeping your Hill hand pump in proper working condition.

Accessories

Hill

Replacing the filter is essential for proper functioning of the pump.

Micron filter replacement Fits all Hill hand pumps (does not fit MK4/MK5 pump*) Easy to replace Instructions: Unscrew the hexagonal connector on top of the base housing (to remove pump) Remove the filter from its seat in the bottom of the housing Place the replacement filter into the housing Replace the o-ring, if needed Reattach the pump and tighten the hexagonal connector Maintain your Hill hand pump, and it'll always be reliable. Hill Hand Pump Micron Filter Replacement.

Accessories

Hill

11mm (or 3/8) dovetail-to-Weaver/Picatinny adapter 3.04 clamping & mounting length .69 high 4.12 overall length 4 hex screws secure the base Includes a hex wrench Use on AirForce rifles and pistols or any other airgun or rimfire that has a 3/8 or 11mm dovetail.

The cross slots deliver extra gripping area for the rings, making it almost impossible for the scope mount to shift. You may need to buy two of these adapters, depending on the length of the scope mount you're using and on the length of the scope rail to which you're attaching this adapter.. This would be an especially good addition to any hard-recoiling spring-piston rifle.

Replacing the filter is essential for proper functioning of the pump.

Hill Hand Pump Micron Filter Replacement.Micron filter replacement Fits all Hill hand pumps (does not fit MK4/MK5 pump*) Easy to replace Instructions: Unscrew the hexagonal connector on top of the base housing (to remove pump) Remove the filter from its seat in the bottom of the housing Place the replacement filter into the housing Replace the o-ring, if needed Reattach the pump and tighten the hexagonal connector Maintain your Hill hand pump, and it'll always be reliable. *For the MK4 micron filter replacement, see PY-A-5558.

Accessories

Hill

11mm (or 3/8) dovetail-to-Weaver/Picatinny adapter 3.04 clamping & mounting length .69 high 4.12 overall length 4 hex screws secure the base Includes a hex wrench Use on AirForce rifles and pistols or any other airgun or rimfire that has a 3/8 or 11mm dovetail.

This would be an especially good addition to any hard-recoiling spring-piston rifle. The cross slots deliver extra gripping area for the rings, making it almost impossible for the scope mount to shift.